Setting up your Foam Cannon Rental from that foam party guy is quick and easy!

Wilkes-Barre, Scranton, Mountain Top, Dunmore, Nanticoke, Pittston, Dallas, Edwardsville, Sweet Valley, Hazleton, and Bloomsburg

Serving Northeastern, PA

1. Put the cannon on tripod (Two legs should face away from the direction the foam will be going)

2. Attach the swivel handle to the cannon.

3. Put up barricades in front of the cannon and bin, secure with provided weights.

4. Connect the short hose to the cannon securely.

5. Plug in the yellow GFCI pigtail into the outlet, then plug in the extension cord.

6. Put an on-off valve on the end of the water filling hose.

7. Begin to fill the water bin, making sure the filling hose is at the bottom and secured to the barrel with the clamp.

8. Put the pump in the water.

9. Connect the power for the pump and cannon to the extension cord reel (Leave turned off).

10. Keep the hose below water level, near the bottom, to avoid foam forming in the bin.

11. As the bin fills add the foam solution per instructions

12. When the water is near he top turn the hose off. Do not attempt to move the bin when full.

13. Put the cannon red switch in the on position, and then turn on the extension cord reel. To turn off, switch off the reel.